Verification of unified effective stress theory based on the effect of moisture on mechanical properties of fiber reinforced unsaturated soil

The unified effective stress theory based on suction stress (SSCC theory) enables the characterization of soils under both saturated and unsaturated conditions with one closed-form relationship. This study provides experimental verification of this theory through the unconfined compressive strength test (UCS) and indirect tensile test strength (ITS) on silty clay soil stabilized with fiber. A series of matric suction, ITS, and UCS tests were conducted to validate the SSCC theory through the representation of the results of ITS and UCS tests in terms of mean total stress (p) versus deviatoric stress (q) and mean effective stress (p`) versus deviatoric stress (q). The results of the validation procedures showed that the SSCC theory is applicable and valid at a range of 6%–16% of water content on the silty clay and the silty clay fiber-reinforced soils. There is a small fluctuation in the increase of ITS and UCS values with increasing fiber content due to randomly oriented distribution of the fiber. The addition of glass fiber does not significantly affect the capacity of water retention of the soil. It improves the condition of the mechanical soil properties at the end of construction more than of the effective stress condition.     

Electrophoretic deposition of graphene oxide on carbon brush as bioanode for microbial fuel cell operated with real wastewater

Microbial fuel cell (MFC) is a promising technology for simultaneous wastewater treatment and energy harvesting. The properties of the anode material play a critical role in the performance of the MFC. In this study, graphene oxide was prepared by a modified hummer's method. A thin layer of graphene oxide was incorporated on the carbon brush using an electrophoretic technique. The deoxygenated graphene oxide formed on the surface of the carbon brush (RGO-CB) was investigated as a bio-anode in MFC operated with real wastewater. The performance of the MFC using the RGO-CB was compared with that using plain carbon brush anode (PCB). Results showed that electrophoretic deposition of graphene oxide on the surface of carbon brush significantly enhanced the performance of the MFC, where the power density increased more than 10 times (from 33 mWm^?2 to 381 mWm^?2). Although the COD removal was nearly similar for the two MFCs, i.e., with PCB and RGO-CB; the columbic efficiency significantly increased in the case of RGO-CB anode. The improved performance in the case of the modified electrode was related to the role of the graphene in improving the electron transfer from the microorganism to the anode surface, as confirmed from the electrochemical impedance spectroscopy measurements.     

Controllable electrodeposition synthesis of Pd/TMxOy-rGO/CFP composite electrode for highly efficient methanol electro-oxidation

A novel and high-efficiency Pd/TM_xO_y-rGO/CFP (TM_xO_y = Co₃O₄, Mn₃O₄, Ni(OH)₂) electrocatalyst for directly integrated membrane electrode was synthesized by controllable cyclic voltammetry electrodeposition combined with hydrothermal process. The results showed excellent performance towards methanol oxidation reduction. The Pd/Co₃O₄-rGO/CFP as-prepared catalyst has the best electrocatalytic activity, and mass activity is 5181 mA·mg⁻¹_Pd, which is about 40 times and 4.3 times that of the commercial Pd/C and Pt/C catalyst (JM). It can be attributed that the small size of Pd nanoparticle, uniformity of distribution, and the synergistic interaction between transition metal oxide on the support surface and Pd nanoparticles. The prepared Pd/TM_xO_y-rGO/CFP composite electrode is a promising catalyst for integrated membrane electrode assembly of proton exchange membrane fuel cells in the future.     

碳纤维复合材料薄壁圆筒的轴向导热系数测试

碳纤维复合材料薄壁圆筒为各向异性导热，其轴向导热系数是筒体温度场理论计算、成型工艺优化的重要参数。碳纤维复合材料圆筒由于较小的截面面积给筒体加热、热量有效传递带来了较大困难。本文以平板材料导热系数的稳态法测试国家标准为基础，基于傅里叶一维稳态导热原理，设计了一套用于薄壁圆筒轴向导热系数测试的装置，采用双试件对称加热、辐射换热防护及热对流环境控制等实现了热量沿筒体轴向的有效传导，利用该装置对导热系数已知的铝筒进行测试，验证了该装置设计的可行性，得到了碳纤维复合材料薄壁圆筒的轴向导热系数为（4.60±0.13） W/(m•K)。     

鄂尔多斯盆地延长组致密砂岩储层微观孔喉特征差异及其成因

为分析不同沉积与成岩作用改造下致密砂岩储层的孔喉类型及其参数差异，利用物性、铸体薄片、扫描电镜、恒速压汞、图像粒度与X衍射实验结果，对比了鄂尔多斯盆地合水地区延长组长8储层和薛岔地区延长组长6储层的孔喉类型，定量评价了孔喉参数，揭示了形成原因。结果表明，合水地区长8储层孔隙更为发育，粒间孔、溶蚀孔、晶间孔和微孔、弱压实成因缩颈状喉道和溶蚀成因、粘土胶结成因管束状喉道含量高；薛岔地区长6储层的孔隙类型少且发育程度较差，压实成因片状、弯片状喉道含量高。两个区块的孔隙参数差异小，喉道参数差异大，前者大喉道更为发育，喉道差异大，孔喉比大，对渗透率起贡献的喉道分布范围更宽。相同渗透率条件下，前者的平均喉道半径、主流喉道半径和孔喉比大于后者。沉积水动力条件、粒度、碎屑组分、填隙物、成岩作用类型及其改造程度是两个研究区孔隙发育程度不同、喉道类型差异和孔喉参数表现出不同特征的主要原因。     

Yoghurt‐type beverage with partial substitution of milk by a chickpea extract: Effect on physicochemical and flow properties

The objective of this study was to determine the evolution of physicochemical and flow properties of a yoghurt‐type beverage partially replaced with a chickpea extract over a period of 22 days. From two chickpea extracts, Blanco Noroeste was selected for its higher protein content. Six yoghurt‐type formulations were prepared, stored at 4 °C and analysed on days 1, 8, 15 and 22. pH was 4.24–4.75, while brightness was 81.7–94.5. Flow properties of the yoghurt‐type exhibited a non‐Newtonian behaviour. From three formulations that underwent sensory evaluation, the 30:70 mix obtained the highest acceptation. This yoghurt‐type beverage exhibited characteristics similar to natural yoghurt.     

水蒸气对煤焦油模化物裂解行为及析碳的影响

采用机械化学法制备Ni-Ce/Al₂O₃催化剂，在固定床反应器中考察了水蒸气气氛对煤焦油模型化合物甲苯＋芘催化裂解行为的影响。根据产物生成规律提出了芘向萘转化的裂解机理，并以D₂O对其进行了验证。通过XRD、TG-DTG和Raman等表征了析碳的类型与结构特征。结果表明：相较于纯氮气气氛，水的加入可明显提升重质组分芘的裂解率，且随水碳比（S/C）增加呈先增加后降低的趋势，在S/C=0.15时达到最大值98.93%，比S/C=0时增加32.09%。析碳率随S/C比增加一直呈下降趋势，由S/C=0时的10.04%降至S/C=0.26时的5.39%。析碳分析结果表明，S/C=0时，生成的积炭类型主要是β型碳及γ型碳，水蒸气存在时，活性较高的α型碳含量增加，说明水蒸气的持续消碳作用抑制了C_α向C_β与C_γ方向转化。     

Mechanical properties of continuous bamboo fiber-reinforced biobased polyamide 11 composites

This study is devoted to the analysis of the properties of continuous bamboo fiber (BF)-reinforced polyamide 11 (PA 11) composites. The SEM observations highlighted continuity between BFs and the polymeric matrix showing a high density of hydrogen bonds. The comparative calorimetric study of the matrix and its composites showed that the crystallinity of PA 11 was not modified by the presence of bamboo fibers. The physical aging observed in PA 11 is no more observed in composites due to physical interactions between PA 11 and BFs. The mechanical properties were investigated by tensile strength and dynamic mechanical analysis. The introduction of BFs enhanced Young's modulus of the matrix by a factor of 10. The presence of BFs also improved the storage shear modulus G′ over the whole temperature range. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47623.